SEARCH


FM STATIONS
Products


TX40K-KLC
Upon request

COD. TX40KSS/60D218J

Power: 40.000W

TX40K-KLC

40.000W Liquid cooled system.

FEATURES

HARDWARE FEATURES: Maximum modularity and scalability of the system from economical compositions “single exciter” to redundant custom compositions “double exciter”.

POWER & QUALITY:
With the family of RVR’s liquid transmitters based on the U-KLC series, is possible to realize compact equipments up to 20kW, with high energy savings thanks to the use of high efficiency pumps and no forcing ventilation. The Cooling system is with low pressure circuit and double pump in automatic switching and diagnostics.

RELIABILITY & REDUNDANCY (business continuity): Extremely safe operation: by pressing the emergency button is cutting the power supply line to the various relay switches while remaining exciters operational.

USER-FRIENDLY FEATURES:user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters. user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters.

EASE OF MAINTENANCE:accessibility and ease of maintenance are ensured by advanced modular engineering concepts incorporated in the transmitter and by its lightweight components. Better cleaner work environment and low environmental noise.

REMOTE CONTROL:the device comes with a powerful, complete telemetry system.




TX40KSS/60D218J
Parameter Value
GENERALS
RF Output Power 40 kW
Frequency Range 87,5 – 108 MHz, Programmable in 1,10,100 or 1000 KHz steps
Frequency Stability ±1 ppm
Nominal Frequency Deviation ±75 KHz (peak)
Maximum Frquency Deviation ±100 KHz (peak)
Class of Emission 180KF8E
Stereo transmissions Acc. to ITU-R / Rec. 450 (Pilot tone)
RF Output Impedance 50 Ω, Unbalanced
RF Output Connector 4-1/2” EIA Flange
VSWR 1.4:1 with atomatic fold-back at higher VSWR
Frequency Control Synthesizer µ processor control
Modulation Capability ±150 KHz
Modulation Mode Mono, Stereo, Multiplex, SCA, RDS, DARC, Aux
Pre-emphasis Mode 0/50 (CCIR) µ, 75 (FCC) µs
Asynchronous AM S/N Ratio >70 dB, unweighted, referred to 100% AM modulation at 400 Hz, 50 µs Pre-emphasis and without FM modulation
Synchronous AM S/N Ratio >55 dB, reference to 100% AM modulation at 400 Hz, 50 µs Pre-emphasis with FM modulation at 75 KHz of deviation
Harmonics suppression and Spurious Typically 85 dB
Overall efficiency Typically 70/72%
RF Harmonics Exceeds ETSI/CCIR/FCC requirements
RF Spurious Exceeds ETSI/CCIR/FCC requirements
Max Frequency Tolerance As per ITU (R)
Analogue Input level {±75 Khz (peak) deviation} -6 dBu - +6 dBu at 1 Khz, 0 dBu
Digital Input level {±75 Khz (eak) deviation} -20.0 dBFS – 0 dBFS (adjustable) at 1 Khz
MONO OPERATION
S/N ratio > 90 dB (typical 92dB), 75KHz deviation (30 Hz to 15 KHz base band) rms, unweighted
Total Harmonic Distortion + Noise Better than 0.15%
Inter Modulation Distortion SMPTE Better than 0.20% (60 Hz / 7 KHz, 4:1, +4 dBu)
Frequency Response ±0.2 dB (30 Hz -15 KHz)
Audio Input Impedance 600 Ω balanced, 10 kΩ unbalanced
MPX OPERATION
S/N ratio > 90 dB, 75 KHz deviation rms, unweighted
Total Harmonic Distortion + Noise < 0,02%
Inter Modulation Distortion < 0,02%, 60 Hz / 7 KHz, 4:1, +4 dBu
Frequency Response ±0,3 dB, 30 Hz to 100 KHz
Transient Intermodulation Distortion 0.03%, 2.96 KHz square wave and 14 KHz sine wave
STEREO OPERATION
Audio Input Impedance 2 K ohm or more
Stereo FM S/N Ratio, unweighted >84 dB, 30 Hz to 15 KHz, 75 KHz deviation (L or R), rms
Stereo Separation (Sine Wave) ≥ -60 dB (30 Hz – 15 KHz)
Linear Cross Talk Better than 50 dB, referred to 100% modulation (30 Hz to 15 KHz)
Non-linear Cross Talk Better than 50 dB, referred to 100% modulation
Total Harmonic Distortion + Noise (L or R) 0.02%
Internal Modultion Distortion SMPTE (L or R)

The image of this layout is purely demonstrative and may change without notice. The configuration is only referred to installed equipment; rack, cover panels and all others accessories are to be defined at order.




ORDERING INFORMATION

  • TX40K-KLC
    40.000W Liquid cooled system.
  • TX40KSS/20D218J
    Modular transmitter, 40kW (composed of MAX-CCU + 2x HC-CCU + 8x PJ5000U-KLC + 2x PTX30LCD/S).
  • TX40KSS/41D218J
    Modular transmitter, 40kW (composed of MAX-CCU + 2x HC-CCU + 8x PJ5000U-KLC + 2x PTX30LCDDSP).
  • TX40KSS/60D218J
    Modular transmitter, 40kW (composed of MAX-CCU + 2x HC-CCU + 8x PJ5000U-KLC + 2x PTX30DDS).
  • TX40KSS/20S218J
    Modular transmitter, 40kW (composed of MAX-CCU + 2x HC-CCU + 8x PJ5000U-KLC + PTX30LCD/S).
  • TX40KSS/41S218J
    Modular transmitter, 40kW (composed of MAX-CCU + 2x HC-CCU + 8x PJ5000U-KLC + PTX30LCDDSP).
  • TX40KSS/60S218J
    Modular transmitter, 40kW (composed of MAX-CCU + 2x HC-CCU + 8x PJ5000U-KLC + PTX30DDS).




Download the General Catalog

SUBSCRIBE TO OUR NEWSLETTER

Receive all the news and promotions