R.V.R. Elettronica

STATIONS ACCESSORIES > CHANGEOVER UNITS SYSTEM > 1+1 CHANGEOVER SYSTEM


SCMLCD1+1

COD. SCMLCD1+1

SCMLCD1+1

Telemetry automatic changeover unit.

FEATURES

  • Up to 1+1 Changeover compatible with all RVR transmitters.
  • “1+1” automatic changeover takes place across many transmitters and a spare one.
  • Integrates on-board telemetry unit to guarantee utmost transmitter site's control.
  • User-friendly graphic display ensures prompt reading and easy setup of all operating parameters.
  • Features 24V connector that could be used as backup power in case of main power failure.
  • Lightweight and rugged stainless steel 2 HE rack case.







SCMLCD1+1
Parameter U.M.ValueNotes
GENERALS
Integrated coax-relèOnly /V2 Yes 
Ambient working temperature  -10 °C  to + 50 °C / 95%Relative humidity non condensing
POWER REQUIREMENTS 
AC Power inputAC Supply Voltage 115 - 125 - 230 - 250 VAC ±15% 
 Active Power Consumption W 
 Connector VDE IEC Standard 
DC Power inputDC Supply Voltage 24 VDC 
 DC Current A 
MECHANICAL DIMENSIONS
Phisical dimensionsL x H x Wmm / inch483 / 19EIA rack
  mm / inch88 / 3 1/22HE
Weight kgAbout 4 
Cooling  Convection cooling 
Acoustic noise dBA0 
AUDIO INPUTS
Analog  8 ÷ 32Analog inputs depending by expansion card number
Digital/Analog  16 ÷ 64Digital inputs depending by expansion card number
OUTPUTS
Relay  8 ÷ 32Analog inputs depending by expansion card number
INTERFACES
User interface  Graphical LCD - 128 x 64  with Encoder
Signalling LEDs / synoptical  Yes 
I2C  Yes 
RS232  Yes 
FUSES 
On mains  1 External fuse 4 A F - 5X20  mm 
On services  X 
On PA Supply  X 
On driver supply  X


The image of this layout is purely demonstrative and may change without notice.


ORDERING INFORMATION

  • SCMLCD1+1
    Telemetry automatic changeover unit.
  • SCMLCD1+1/T0
    Automatic changeover "1+1" unit and telemetry unit with Nr 1 I/O base card on board.
  • SCMLCD1+1/T1
    Automatic changeover "1+1" unit and telemetry unit with Nr 1 I/O additional card on board.
  • SCMLCD1+1/T2
    Automatic changeover "1+1" unit and telemetry unit with Nr 2 I/O additional cards on board.
  • SCMLCD1+1/T3
    Automatic changeover "1+1" unit and telemetry unit with Nr 3 I/O additional cards on board.

PIEZAS DE REPUESTO