R.V.R. Elettronica

DISCONTINUED > DISCONTINUED > ACCESSORY


TRDS4002-LUXOR-B, TRDS4002-LUXOR-C

COD. TRDS4002-LUXOR-B, TRDS4002-LUXOR-C

TRDS4002-LUXOR-B, TRDS4002-LUXOR-C

Radio Data System Encoder. Radio Data System Encoder with MPX by-pass function.

Features

PRIMARY APPLICATION: the TRDS4002-LUXOR is a RDS encoder designed to support all popular services provided by UECP SPB490 including dynamic services like TMC, TDC, IH, EWS and RT+, and it uses fully digital technology to guarantee a very high quality of modulation and spectral purity.
TECHNICAL FEATURES: the TRDS4002-LUXOR is fully digital and it uses only high quality components like A/D and D/A converters at 24 bit and numerical processing at 32 bit. Using the WINRDS+ software you can assign station and apparatus codes in order to be able to selectively program any
TRDS4002-LUXOR remotely such as satellite, LAN or Internet. The firmware can be updated via serial port without need for hardware settings and without interruption of service.
INPUT/OUTPUT INTERFACE: it can integrate an advanced BYPASS system between MPX input and outputs that ensure the service also in the event of failures (version TRDS4002-LUXOR-C).
HARDWARE FEATURES: the system housed in lightweight and rugged stainless steel rack cases having the dimension of 1 HE.

  • Supports all popular services provided by UECP SPB490 such as TMC, TDC, IH, EWS and RT+. 
  • Fully digital with high quality of modulation and spectral purity. 
  • Integrates high quality A/D and D/A converters at 24 bit and numerical processing at 32 bit. 
  • Remotable via satellite, LAN or Internet using the WINRDS+ application. 
  • Advanced by-pass between MPX input and outputs to ensure broadcast conntiuity. Only on TRDS4002-LUXOR-C.




TRDS4002LUXOR-B
Parameters
GENERALS
Primary power 115 - 230 VAC ±10%
Phisical dimensions (W x H x D) 483 x 44 x 280 mm
Weight 3,5 kg
Environmental working temperature -10 to + 40 °C
PILOTE INPUTS
Connector BNC unbalanced
Pilot frequency synch. 19KHz +/- 2Hz
Input level -30 / +12dBu (Sinusoid. o TTL)
ANALOGUE MPX INPUTS
Connector BNC unbalanced
Impedance 10 Kohm
Input level Gain 0dB / Out.MPX
Maximum input level +20dBu
OUTPUTS 1 & 2
D/A Converter 24 bit
Connector BNC unbalanced
Impedance 50 ohm
Output level
-12dBu to +12dBu - step 0,1dB (Adj - Sw)
(Gain0dB / inp.MPX)
Maximum output level +20dBu
RDS OPERATION
Standards Cenelec 50067 Specification
Command formats UECP - SPB490 Ver.6.1 / 2003
Static services DI,PI,M/S,TP,TA,TP,TPY,RT,CT, AF,PIN,EON,PSN
Dynamic service TMC,TDC,EWS,IH
RDS Groups 0A, 1A, 2A, 3A, 5A, 6A, 8A, 9A, 14A
Data set N° 6
RDS MODULATION
Subcarrier frequency 57 KHz ±1.5 Hz
Bandwidth +/- 2,4KHz (-50dB)
Synchronisation Internal / external
RDS Phase adjustment Adjustable up to 360 degrees
in 0.33-degree increments
ELABORATION
A/D Conversion 24 bit (Dynamic range 105dB)
D/A Conversion 24 bit (Dynamic range 123dB)
DSP Elaboration 32 bit, fixed point
OTHER CONNCTORS
Serial port 3 RS232 DB9 Connector., (1 USB Optional)
Serial connection rate 1200 to 115200 Baud
Ethernet (1 RJ45 Connector Optional)
REMOTE Input 8 Input + 8 Output (Optional)
STANDARD COMPLIANCE
Safety EN60215:1997
EMC EN 301 489-11 V1.4.1
The image of this layout is purely demonstrative and may change without notice.