R.V.R. Elettronica

FM STATIONS > TX-K-KLC MODULAR SERIES > UP TO 20.000W


TX10KSS/60S212J

COD. TX10KSS/60S212J

Potencia: 10.000W

TX10KSS/60S212J

Modular transmitter, 10kW (composed of HC-CCU + 2x PJ5000U-KLC + PTX30DDS).

TX10KSS/60S212J
Parameter Value
GENERALS
RF Output Power 10 kW
Frequency Range 87,5 – 108 MHz
Frequency Stability ±1 ppm (WT from -10°C to 50°C)
Frequency programmability By software, with 10 kHz steps
Modulation Mode Direct carrier frequency
Operational Mode Mono, Stereo, Multiplex
Modulation capability 150 kHz Stereo, 200 kHz Mono/MPX
RF Output Impedance 50 Ω, Unbalanced
RF Output Connector 1-5/8” EIA Flange
Pre-emphasis Mode 0/50 (CCIR) µs,75 (FCC) μs
Asynchronous AM S/N Ratio ≥ 65 dB (typical 70dB)
Synchronous AM S/N Ratio ≥ 50 dB (typical  60dB)
Harmonics suppression and Spurious < 75 dB (typical  80dB)
Overall efficiency Typically 70/72%
MONO OPERATION
S/N ratio  > 85dB (typical 87dB)
Total Harmonic Distortion + Noise < 0,05% (typical 0.03%)
Inter Modulation Distortion SMPTE < 0,02%
Frequency Response Better than ±0,5 dB (typical ±0.2dB)
Audio Input Impedance 600 Ω or 10 kΩ
MPX OPERATION
Composite S/N ratio > 85dB (typical 87 dB)
Total Harmonic Distortion + Noise < 0,05%
Inter Modulation Distortion < 0,05%
Frequency Response ±0,2dB
Audio Input Impedance 50 Ω or 10 kΩ
STEREO OPERATION
Stereo FM S/N Ratio > 80 dB (82 dB typical)
Total Harmonic Distortion + Noise (L or R) < 0,05%
Inter Modulation Distortion (L or R) ≤ 0,03%
Transient intermodulation distortion (L or R) < 0,1 dB (typical 0.05 dB)
Frequency  response (L or R) ±0,5 dB
Stereo Separation > 50dB (typical 60 dB)
Main / Sub Ratio > 40 dB (typical 45 dB)
Audio Input Impedance 600 Ω or 10 kΩ



ORDERING INFORMATION

  • TX10KSS/60S212J
    Modular transmitter, 10kW (composed of HC-CCU + 2x PJ5000U-KLC + PTX30DDS).