GPSRXNV-01

COD. GPSRXNV-01

FEATURES

The GPSRXNV is designed to being contained into a 19” rack box of 1HE.
The different functions are performed by modules with most connections achieved through male and female connectors or through flat cables terminated by connectors.
This design facilitates maintenance and module replacement.
It contains a buffer battery, to avoid possible lack of power supply, and its internal battery charger.
Four LEDs on the front panel provide the following status indications: AC-ON, DC-ON, EBO-OK and GPS-LOCK.
Comes with N-type connector for GPS antenna input, BNC connector for 1PPS output signal, BNC connector for 10MHz sync signal and a DB9 connector for status alarm signaling.

GPSRXNV-01
Parameters	U.M.	Value	Notes
GENERALS
Operating temperature		0°C +50°C
Storage temperature		- 40°C +85°C 0°C +50°C
Operating temperature		0°C 85°C,	Without condensation
POWER REQUIREMENTS
C.A. power supply		c.100-120-230-250 VAC , 50-60 Hz
C.C. power supply	VDC	+12
MECHANICAL DIMENSIONS
Phisical dimensions	mm / inch	483 / 19	EIA Rack
	mm / inch	44 / 3 / 1 / 2	1HE
Weight	kg	4
AUDIO INPUTS
Antenna Input
Connector		BNC
Accuracy to UTC, with GPS locked		± 50 ns (1σ)
GPS system		Integrated
OUTPUTS
Connector		N-type 5V output for antenna power supply
Typical level		TTL
10MHz output frequency accuracy		< ± 2 x 10-12
1pps TTL output
10MHz output
Connector		BNC
Signal form			Sinusoidal
Typical level		5 dBm / 50Ω
Harmonic distortion	dBc	-25
Connectors
INTERFACES
RS232 serial interface		DB9	Female connector to connect the receiver to an external devices for programming
ALARMS interface		DB9	Male connector signaling of alarm status

The image of this layout is purely demonstrative and may change without notice.

/DSTB-GPSRX
10MHZ 1PPS distributor
/DST10
Adds (3x) auxiliary ouputs at 10MHz and (2x) auxiliary outputs at 1pps