PJ5000U-K
End of life
COD. PJ5000U-K
Power: 5.000W
5.000W Compact amplifier.
FEATURES
PRIMARY APPLICATION: uncompromised high amplification power. Ideal to supplement mid to high power stations.
AMPLIFIER FEATURES: exceptional-gain amplifier with very low input drive power requirement and adjustable power output from 10 to 100 %. Available (optionally) LD “Low Drive” technology which reduces required input drive power to as little as 5W.
HARDWARE FEATURES: easy handling, compact and indeformable thanks to the stainless steel chassis, in 3 rack units each only.
RELIABILITY/CONTINUITY: APC (Automatic Power Control), Foldback protection, redundancy of amplification units and redudancy of power supply units to mantene always on the broadcast transmission, ensure reliable operation under any operating conditions.
OPERATING EFFICIENCY: incorporate a PFC (Power Factor Corrector) power supply, that provides the utmost efficiency for enhanced energy saving and environmental protection, which added to LD-MOSFET technology ensure high efficiency, better than 70% across the bandwidth.
USER-FRIENDLY FEATURES: configurable both in single and three phase. Five pushbuttons for user/device interaction and software that offers a simple, intuitive interface.
INTERFACE CONTROL: total control thanks to microprocessor easily programmed from menu with all key parameters displayed on LCD.
EASE OF MAINTENANCE: advanced module engineering ensures extreme ease of access and simple maintenance.
REMOTE CONTROL: supplied with telemetry connectors and is compatible with all RVR telemetry systems and other popular transmitter remote control systems.
REGULATORY COMPLIANCE: state-of-the-art technology and design results in equipment that is in full compliance with FCC, CCIR, and EC standards.
The image of this layout is purely demonstrative and may change without notice.
PRIMARY APPLICATION: uncompromised high amplification power. Ideal to supplement mid to high power stations.
AMPLIFIER FEATURES: exceptional-gain amplifier with very low input drive power requirement and adjustable power output from 10 to 100 %. Available (optionally) LD “Low Drive” technology which reduces required input drive power to as little as 5W.
HARDWARE FEATURES: easy handling, compact and indeformable thanks to the stainless steel chassis, in 3 rack units each only.
RELIABILITY/CONTINUITY: APC (Automatic Power Control), Foldback protection, redundancy of amplification units and redudancy of power supply units to mantene always on the broadcast transmission, ensure reliable operation under any operating conditions.
OPERATING EFFICIENCY: incorporate a PFC (Power Factor Corrector) power supply, that provides the utmost efficiency for enhanced energy saving and environmental protection, which added to LD-MOSFET technology ensure high efficiency, better than 70% across the bandwidth.
USER-FRIENDLY FEATURES: configurable both in single and three phase. Five pushbuttons for user/device interaction and software that offers a simple, intuitive interface.
INTERFACE CONTROL: total control thanks to microprocessor easily programmed from menu with all key parameters displayed on LCD.
EASE OF MAINTENANCE: advanced module engineering ensures extreme ease of access and simple maintenance.
REMOTE CONTROL: supplied with telemetry connectors and is compatible with all RVR telemetry systems and other popular transmitter remote control systems.
REGULATORY COMPLIANCE: state-of-the-art technology and design results in equipment that is in full compliance with FCC, CCIR, and EC standards.
| PJ5000U-K | ||||
| Parameters | Conditions | U.M. | Value | Notes |
| GENERALS | ||||
| Frequency range | MHz | 87,5 ÷ 108 | ||
| Rated output power | W | 5000 | ||
| Spurious & harmonic suppression | dBc | < -75 (-80 typical) | Meets or exceeds all FCC and CCIR rules | |
| Working temperature | °C | -5 to +50 | ||
| Working humidity | % | 95 | Without condensing | |
| Working altitude | mt | Up to 3000 * | * With adequate air evacuation system in site | |
| POWER REQUIREMENTS | ||||
| Power supply type | Monophase / biphase | Internal wiring | ||
| AC Power input | AC Supply Voltage | VAC | 230 +10% -15% | 400 +10% -15% | Monophase | Threephases Y |
| AC Apparent Power Consumption | VA | 7200 | Measured on threephases 400V | |
| Active Power Consumption | W | 7194 | Measured on threephases 400V | |
| Overall Efficiency | % | >70 (Typical 72) | Measured on threephases 400V | |
| Power factor | 0,998 | Measured on threephases 400V | ||
| Connector | ILME CQ 4/2 | |||
| MECHANICAL | ||||
| Phisical dimensions | Front panel width | mm | 483 | 19" EIA rack |
| Front panel height | mm | 177 | ||
| Overall depth | mm | 720 | ||
| Chassis depth | mm | 655 | ||
| Weight | kg | About 45 | 21 PS+34 RF | |
| Cooling type | Forced, with internal fans | |||
| Acoustic noise | dBA | 78 | Leq 3 min @ 1 m | |
| RF INPUT | ||||
| RF Input | Connector | N type | ||
| Impedance | Ohm | 50 | ||
| Driver power for rated output | W | 50 | ||
| Max input power before protection | W | 100 | ||
| RF OUTPUTS | ||||
| RF Output | Connector | 7/8" EIA | ||
| Impedance | Ohm | 50 | ||
| RF Monitor | Connector | BNC | ||
| Impedance | Ohm | 50 | ||
| Output Level | dBc | Approx. -60 | ||
| AUXILIARY CONNECTIONS | ||||
| Interlock output | Connector | BNC | ||
| Com Bus | Connector | DB15 M | Factory reserved for coupling purposes | |
| I²Cbus | Connector | DB9 F | ||
| Telemetry interface | Connector | DB25 F | ||
| AUX power supply | Connector | X | For exciter mains supply | |
| FUSES | ||||
| On mains | 3 External F 20 T - 10 x 38 (Threephases 230V) | |||
| On services | X | |||
| On AUX Power supply | X | |||
| On PA Supply | 8 Internal fuses F 25 A | |||
| On fans supply | X |
The image of this layout is purely demonstrative and may change without notice.
